|
Get these
benefits:
 Extended
tool life, improved parts finish
Smoke
& odor eliminated
Multiplied
coolant life = Much less machine downtime,
greatly reduced coolant purchase & disposal costs
With these
exclusive Keller advantages:
Superior tramp oil separation - The Keller patented
permanent oil separating (coalescing) element provides extraordinary
surface area in a small package, providing excellent oil splitting
in a compact design.
Rugged construction - By using only 1/2" air-driven
pumps, Keller has eliminated the numerous operating and reliability
problems associated with electrical pumps or smaller air diaphragm
pumps.
Ease of setup and operation - A TKO unit ships UPS
in one box, and setup time is about 15 minutes. Only a 1/4"
compressed air line is required to run the unit. Minimal operator
attention is needed.
Inexpensive - Even including the 1/2" air pump,
the unique Keller TKO compact design is 30% to 50% less costly
than other comparatively equipped systems.
How the
TKO Pump/Skimmer works:
The self-priming air operated pump pulls the
tramp
oil/coolant mixture from the surface of the sump through the
floating inlet device, then through a cartridge filter which
removes any chips from the fluid. The oil/coolant mixture
is
then pumped through the patented Keller all-plastic
separator element immersed in a separator tank. The
cleaned coolant continuously returns to the sump. The oil
layer collects on the top of the separator tank and is
occasionally drained into a waste oil container, simply by
opening the oil drain valve. No other operator attention is
required.
Selecting
and Installing a TKO Separator:
Three models of TKO Separators are offered, to satisfy
any combination of sump size, oil loading, and coolant
characteristics. [Selection criteria listed in table
below] Each TKO Separator is shipped by UPS
complete, ready for setup. The customer supplies only
a 1/4" compressed air line. The unit may be set
on the
floor adjacent to the sump, or hung on the machine tool
using the CLO-1 magnetic frame (see photo). |
|
|
|
|
Model TKO-10.
Footprint (all models)-14" x 14"
|
|
|
TKO-6 mounted on machine tool with
CLO-1 "Cling-On" magnetic frame.
|
|
|
|
The optional bag filter conveniently
removes a large quantity of floating chips before the
oily coolant is pumped to the separator tank.
|
| DISTRIBUTORS: |
TKO Separators are a featured Distributor product line.
|
|
