|
When to
Use a Keller ECO Pump/Skimmer:
Keller ECO electrically-driven pump/skimmers
offer an economical
alternative to the compressed air driven TKO pump/skimmers
for
individual sumps, provided that the coolant has a relatively
low
level of suspended solids. A typical application is removing
tramp
oil from coolant in the supply tank of high pressure coolant
systems,
since this coolant has been prefiltered to remove solids.
The ECO
separators are also useful in shops with limited available
compressed air supply.
Get these
benefits:
 In
high pressure coolant systems
 Reduced
foaming, improved cooling and lubricity
Multiplied
coolant life = Much less machine downtime,
greatly
reduced coolant purchase & disposal costs
With these
exclusive Keller advantages:
Patented
permanent oil separating (coalescing) element,
never needs changing
Compact
inlet device can access any sump
Sets up
in minutes--Requires minimal operator attention
|
ECO-5.5 Mounted on cover of
high pressure coolant system tank with CLO-1-HP Magnetic Mount
|
|
How the
ECO Pump/Skimmer works:
An ECO pump/skimmer pumps oily coolant from
the surface of a sump or supply tank, removes the tramp oil,
and continuously retums the cleaned coolant at a flow rate
of 180 gallons per hour. The oily coolant is pulled through
a floating inlet device by a submerged pump mounted to the
side of the sump or tank with the magnetic mount provided.
The patented permanent Keller oil coalescing element separates
the tramp oil, and the cleaned coolant returns to the tank
or sump by gravity. The oil layer collects on the top of the
separator tank and is occasionally drained into a waste oil
container, simply by opening the oil drain valve. No other
operator attention is required.
Selecting
an ECO Separator:
Two models of ECO Separators are offered: 1)
The ECO 5.5, with a 6-gallon separator tank, which is normally
mounted on the cover of the high pressure coolant supply tank
or on the side of a machine tool using a magnetic mount; and
2) The ECO 9.5, with a 10 gallon separator tank, which is
placed on the shop floor adjacent to the machine tool sump.
Each ECO Separator is shipped by UPS complete, ready for setup.
The customer supplies only the 115 volt supply.
|
