| PORTABLE TRAMP OIL PUMP/SKIMMERS | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
HIGH FLOW RATE PORTABLE TRAMP OIL SEPARATORS
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
![]() |
![]() |
![]() |
|
Model #315
|
Model #365
|
Model #457 |
Model #465
|
|
For 1 to 10 sumps to 400 gallons,
with heavy oil & moderate solids loading
|
For 1 to 10 sumps to 400 gallons,
with heavy oil & solids loading
|
For 1 to 10 sumps to 1000 gallons,
with very heavy oil & solids loading
|
For 1 to 10 sumps to 2000 gallons,
with very heavy oil & solids loading
|
Get these benefits: |
|||
| Extended tool life, improved parts finish Smoke and odor eliiminated Multiplied coolant life = Much less machine downtime, greatly reduced coolant purchase & disposal costs |
|||
With these exclusive Keller features: |
|||
| Patented permanent oil separating
(coalescing) element, never needs changing Rugged high flow 1/2" air-operated pump provides rapid tramp oil removal, circulates & aerates entire sump Compact inlet devices can access any sump No electricals- To operate, simply connect 1/4" compressed air line-All required hoses and fittings provided Sets up at a sump in minutes-Requires minimal operator attention-Thousands in service |
|||
Note: Keller also supplies low cost pump & skimmers for individual sumps. Click here to view web page:
| Pump/Skimmers for Single Sumps |
A Keller portable separator can clean a sump in 3 to 4 hours, and then may be moved to another sump and set up in minutes. We recommend that each sump be cleaned once per week. A separator can clean two sumps in a single shift, or 10 sumps per week in a one shift 5 day operation.
The separator model is selected based on:
the sizes of
sumps to be cleaned,
the relative
volume of tramp oil to be removed, and
the quantity
of suspended solids in the sumps.
|
|||||||||||||||||||||||||||||||||||
What is the payout time for
Keller Pump/Skimmers?
Answer: 4 months or less!
| Click here for detailed calculation |
Each separator is supplied with three inlet devices (see below) which
can access the surface of any sump through
an opening as small as 3" diameter. The self-priming air operated
pump pulls the tramp oil/coolant mixture from
the surface of the sump via the inlet device, then through a high capacity
bag filter, which removes chips from the
fluid. The oil/coolant mixture is then pumped through the patented Keller
all-plastic separator elements immersed
in a separator tank. The cleaned coolant continuously returns to the
sump. The oil layer collected on top of the
separator tank can be drained into a waste oil container by opening
the oil drain valve occasionally, usually once
per day. No other operator attention is required.
Inlet Devices |
|
|||
|
|
Model > |
#315 |
#365 |
#457 |
#465 |
| Dimensions (L x W) | 30" x 20" | 30" x 20" | 38" x 24" | 38" x 24" |
| Sump Inlet Devices Provided | #555-07, #555-05, and #555-06------- | #555-09 3 each |
||
| Size of Oil Separator tank | 10 gal | 10 gal | 15 gal | 25 gal |
| Type of Prefilter | Small Bag | Large Bag | Large Bag | Large Bag |
| UPS Shipping Weight | 80 lbs | 115 lbs | 140 lbs | 150 lbs |
| Compressed air requirements | 0.5 SCFM @ 20 to 125 psig (All Models) | |||
| Electricals | None (All Models) | |||
Replacement Polypropylene Filter Bags |
||
|
Note: 5 Filter Bags supplied standard with
each unit
|
||
|
25 Micron Filters, Pack of 5 Bags for #315 |
RAP-25* |
$30 |
|
25 Micron Filters, Pack of 5 Bags for #365, #457, #465 |
RBP-25* |
$30 |
| *25 micron bags supplied unless othjerwise specified. Also available: 100, 50, 10, 5 micron | ||
Installation Requirements, All Models |
|
| Compressed Air Flow Requirement | About 0.5 SCFM |
| Compressed Air Pressure | 20 psig to 100 psig |
| Compressed Air Fitting | 1/4-inch NPTF |
| Electricals | None |
![]() |
|