Magnetic Separators
|
|
FLOW-THROUGH MAGNETIC SEPARATORS CLEAN
STEEL AND IRON CHIPS FROM COOLANT OR OIL
|
- Permanent Rare Earth magnet --- No external power required, no moving parts,
no replaceable parts
- Three sizes for coolant or oil flow rates to
39 gallons per minute at low pressure drop
- Built-in internal bypass permits full fluid
flow even when magnet is loaded with chips
- Magnet easily cleaned in a minute with
cleaning tool provided--No dirty cartridges for disposal
|
 |
|
Where To Use Magnetic Separators
The Keller magnetic separators are ideal for operations such as
mold grinding which produce a large quantity of iron or steel chips.
Install a magnetic separator:
1) Downstream from the coolant pump in the coolant recirculation
line. The internal bypass in the separator ensures full flow even
when the magnet is fully loaded.
2) In a Keller Pump/Filter Unit PFA-1002 as a prefilter to reduce
the solids load on the bag filter.
|
|
|
3) To remove chips from a sump continuously in an external pumping
circuit.
Contact Keller for recommendations.
|
|
How They Work
|
|
|
Contaminated fluid flows past the outside of
the cylindrical magnet, which attracts even
submicron particles of iron or steel. The cleaned
fluid exits through slots in the bottom of the
cylinder, then to the outlet port through an
internal flow passage in the magnet cylinder.
To clean, remove the magnet from the housing.
Scrape the collected chips into a disposal drum
using the tool provided. Cleaning time: about
1 minute
|
 |
 |
 |
| Contaminated Core |
Cleaning Core |
Clean Core |
|
|
Specifications and Ordering Information
| Price-Please call for prices |
|
|
|
| Flow Rate (gallons per minute) |
18 |
26 |
39 |
| Magnet Length |
5" |
10" |
20" |
| Contamination Capacity |
2 lbs |
4 lbs |
8 lbs |
| Inlet/Outlet Ports |
1" NPT |
1" NPT |
1-1/2"
NPT |
| Weight |
5.5 lbs |
11 lbs |
19
lbs |
| |
| |
|
|
| Max. Operating Pressure |
170 psig |
|
|
| Maximum Operating Temperature |
120°F |
|
|
| Materials of Construction: |
|
|
|
|
Housing Head
|
Anodized Aluminum |
|
Housing Bowl
|
SAN Clear Plastic |
|
Magnet Cover
|
304 Stainless
Steel |
|
|
To contact our office, call 800-352-8422 (Outside U.S. 978-264-1911),
FAX 978-264-0221, or e-mail:
kellerinfo@aol.com
|
|
|
|
Keller Products, Inc.
| 1800-352-8422
(978) 264-1911
| Fax (978) 264-0221
www.KellerFilters.com
|
|
