 |
|
PORTABLE PUMP SUMP-SIDE PUMP//FILTER |
PORTABLE PUMP FILTER/UNIT CLEANS
CHIPS & SLUDGE FROM CUTTING OIL OR COOLANT
Thousands in Service Shipped
UPS from Stock
|
|
Keeping Solids Level Low in Sumps:
• Greatly increases tool life, minimizes tool breaking due
to dirty fluid
• Eliminates parts finish problems
• Reduces burden on high pressure filter
• Minimizes downtime and labor for manually
cleaning sumps
Keller Portable PFA-1002 Unit:
• Pulls from sump and continuously returns filtered
fluid to the sump at high flow rate
• No need to pump out sump or shovel solids
• Cleans a typical sump in minutes, then can easilybe moved
to the next sump
• Portable PFA-1002 keeps multiple sumps clean
• Also filters and recycles fluid from chip spinners or
chip compactors
• Air-operated––No electricals––Inherently
fireproof
|
 |
"...The PFA-1002 is rugged and
easy to use. It works exactly as described, with neglible operating
cost, and has eliminated several costly problems. No more pumping
out sumps, no more problems of fines affecting parts finishes,
no more short runs with high pressure coolant filter..."
---Marox Corp.
 |
 |
How
the PFA-1002 Works
The PFA-1002 contains a large bag filter and a high flow 1"
air operated diaphragm pump, mounted on a cart. The 8-foot inlet
and outlet wands, consisting of 5 feet of flexible hose and
3 feet of rigid pipe, can access all corners of the sump. With
both wands inserted in the sump, the force of the filtered liquid
discharge scours the bottom of the sump to suspend chips and
sludge for pickup by the inlet wand. With a 20 gallon per minute
recirculation rate, the PFA-1002 cleans a typical sump in minutes
and then can easily be moved to another sump and set up simply
by connecting a 1/4" compressed air line.
Complementary Products
from Keller
• Flow-through Magnetic Separator can be installed
on inlet to PFA-1002 to remove the bulk of steel &
iron particles
Click here for Flow-through
Magnetic Separator page
• In-line Coolant Filter with permanent cleanable
filter element protects through-the-spindle tooling
Click here for In-LIne
Coolant Filter page
Keller specializes in equipment to maintain clean metalworking
fluids. Call Keller for recommendations. |
|
 |
“...For a modest investment,
the two PFA-1002 units have allowed me to increase shop
throughput, avoid unscheduled shutdowns, eliminate parts
finish problems, and greatly reduce labor costs for sump
maintenance...”
--CSI Manufacturing
|
|
|
|
Ordering
Information
|
|
|
| Ordering Designation> |
PFA-1002 |
Price: |
$2995.00 |
| Includes all
hoses, cart, and five 25 micron filter bags |
| Additional Filter Bags: |
|
|
Price |
| Box of five polyester felt bags, 25 micron |
RCP-25 |
|
$45.00 |
| Box of five nylon mesh bags, 100 micron |
RCN-100 |
|
$80.00 |
|
Note: Other filter bags from 5
micron to 100 micron available
|
| |
| Specifications
PFA-1002 |
| Flow Rate |
20 gallons per minute |
| Compressed air requirements |
5 SCFM @ 20 to 125 psig |
| Electricals |
None |
| Dimensions of cart |
20" x 30" |
| Shipping Weight (Shipped UPS) |
100 lbs |
| |
|
|
Click Below to Access Actual Case Histories
of Shops Using the PFA-1002:
OTHER APPLICATIONS FOR PFA-1002 PUMP/FILTER UNIT
|
Filter and recycle
oil from chip spinners –The oil discharged from the
chip spinners is pulled through the filter on the PFA-1002 by
the self-priming pump, and the filtered oil is pumped to the
oil feed tank or anywhere else in the shop
In tandem with VAC-55 vacuum drum head, completely clean
sludge, chips,
and fluid from sumps when changing the coolant or oil
|
|
To
contact our office, call 800-352-8422 (Outside U.S. 978-264-1911),
FAX 978-264-0221, or e-mail: info@kellerfilters.com
|
